Installing on Cabinet Doors

Installation Instructions for Mirror Demister on Hinged Doors

Step 1
Step 1

Router out area slightly larger than white sleeve and a groove for the cable across the top hinge.

Step 2
Step 2

Attach Demister to door. Drill hole through which cable can pass.

Step 3
Step 3

Connect Demister cable to power source gable inside white box. Leave a little slack in cable so door can open and close without stretching cable.

Step 4
Step 4

Mirror can be glued or screwed directly onto door. (Do not screw through Demister)

Return to Previous Page